Several radios in the Astro25 line are considered 'AN' or '4-meg' radios and contain a smaller flash rom chip (4 megabyte vs 8 megabyte) and are more limited in firmware and feature support. Earlier models of the XTS2500 and the Astro Spectra Plus are considered AN radios and are limited to the firmware version specified below. The latest firmware (as of ) is R20.50.08 for 8-meg BN radios and R09.00.41 for 4-meg AN radios.Īnalog and digital audio is processed by the audio DSP before it is sent through the RF section and transmitted. The default settings are fine, and most people will have no complaints with the quality of audio from these radios. However, as found through testing and tweaking by members of communications.support, there exists a much better setting for Astro25 radios that can make the transmitted audio from these units sound even better. CPS version R12.00.00 and greater ordered after June 2014 will only support Windows 7 and 8. These audio settings can be found in the Radio Configuration -> Radio-Wide -> Tx Audio Control Per Mode section of CPS.Īstro25 radios program using the Astro25 Portable and Mobile CPS Packages. Modulation Limiting (12.5 / 20 / 25 kHz Channel). The portable version of CPS supports the XTS2500, XTS4000, and XTS5000. #ASTRO 25 PORTABLE CPS VERSION R20.01.0 PORTABLE# Astro25 Mobile CPS supports the Astro Spectra Plus, XTL1500, XTL2500, and XTL5000. If you have a radio whose bandsplit is outside the amateur bands (a UHF-R2 'S'-split radio for the 450-520 MHz band would be an example) you must modify the CPS executable to allow the software to accept frequencies which are out of band for the model. #ASTRO 25 PORTABLE CPS VERSION R20.01.0 SOFTWARE#

#ASTRO 25 PORTABLE CPS VERSION R20.01.0 SOFTWARE#.

#ASTRO 25 PORTABLE CPS VERSION R20.01.0 PORTABLE#.

Astro 25 portable cps version r20.01.0